Turn on the PhotoFrame
Note
•
When you connect the PhotoFrame to a power supply,
the PhotoFrame turns on automatically.
1
When the PhotoFrame is turned off and
connected to the power supply, you can
hold
to turn on the PhotoFrame.
»
A few seconds later, the home screen
is displayed.
For the À rst time you turn on the
PhotoFrame :
•
The screen prompts you to select a
language.
•
Select a language, and then press
to conÀ rm.
•
The screen prompts you to set time
and date.
•
Press
/ / / to set time and date,
and then press
Tip
•
If the PhotoFrame is disconnected from the power
supply for a long time, you need set time and date again
after you turn on the PhotoFrame.
to conÀ rm.
EN
7