LG MULTI V HYDRO KIT ARNH963K2A4 Installation Manual page 75

Temperature Setting
Easily control the system for the desired temperature.
1. On the main screen, press the Left < and Right > buttons to
select the desired temperature category.
2.
ture.
3. Controlling the system for the desired temperature is possible for
the Cooling, Heating, and AI / Auto modes.
Table 28: Temperature Setting Options.
Mode
Room Temperature
Leaving Water Temperature
Domestic Hot Water Tank
Temperature
Domestic Hot Water Heating Operation
Sets the function to use or not to use an installed domestic hot water
tank.
<
• This function is not used when the domestic hot water tank is not
installed.
•
installation section.
View Temperature
Use to check the current temperature. From the main screen, enter
the monitoring screen by pressing the Back button.
Table 29: View Temperature Options.
Mode
Room Temperature
Inlet Temperature
Outlet Temperature
DHW Temperature
Solar Heat Temperature
Room Temperature setting is available when a remote room air sensor (sold separately) is installed.
If the desired temperature is lower than the water temperature, heating operation will not be performed. Set the
desired temperature higher than the water temperature.
Domestic hot water tank temperature setting is available if a domestic hot water tank is installed.
View DHW temperature (only displayed when an installed DHW is in heating mode)
View solar power temperature (only displayed when an installed DHW is in water heating mode)
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG Life's Good" is a registered trademark of LG Corp.
CONTROLLER OPERATION
Figure 83: Temperature Setting Screen.
-
Description
Figure 84: Domestic Hot Water Heating Operation Screen.
Figure 85: View Temperature Screen.
75°
75°
75°/ 75°
Description
View room temperature
View inlet temperature
View outlet temperature
113°
122°
75°
75