Table 11-17 Ultramat 7: Measuring Ranges - Siemens SIPROCESS GA700 Operating Instructions Manual

Technical specifications
11.3 Technical specifications of analyzer modules

Table 11-17 ULTRAMAT 7: Measuring ranges

Measuring ranges
Number of measuring ranges
Component that
can have param‐
eters assigned
in the measuring
ranges
Table 11-18 ULTRAMAT 7: Gas inlet conditions
Gas inlet conditions
Sample
gas pres‐
sure
Pressure loss between sample gas inlet and sample
gas outlet
Sample gas flow
Sample gas temperature and humidity
* Nominal quantities in the section "Determining the technical specifications"
Table 11-19 ULTRAMAT 7: Time response
Time response
Warm-up period at room temperature
Response charac‐
teristics
Table 11-20 ULTRAMAT 7: Measuring response
Measuring response
Output signal fluctuation
Zero point drift
Measured value drift
130
Max. 4; parameters can be assigned freely
Component
CO
CO
2
Normal pressure (atmospheric pressure
compensation)
High pressure (sample gas pressure sen‐
sor)
Dead time (T )
10
Signal rise or fall time (rise time T
T ) with application-specific electronic damp‐
f
ing of 10 s
Time for device-internal signal processing T
Delayed display T
Smallest possible span
0 ... 10 ppm
0 ... 5 ppm
500 to 1 500 hPa (absolute)
500 to 3 000 hPa (absolute)
< 10 hPa at 1.5 l/min
18 to 90 l/h (0.3 to 1.5 l/min)
0 to 50 °C at relative humidity < 90%, in refer‐
ence to the respective ambient temperature;
avoid condensation in gas path
or fall time
r
90
≤ ± 1% of smallest measuring range acc. to nameplate
≤ 2%/week of smallest measuring range acc. to name‐
plate
< 1% of the current measuring range per week
Operating Instructions, 05/2015, A5E31874006-03
Largest possible span
0 ... 100 %
0 ... 100 %
< 2 h
Application-specific (max. 3.6 s)
application specific < 14 s
Approx. 1 s
v
The following applies: T
+ T + T
r/f v
Rack-mounted device
< T
90 10