Table of Contents
Advertisement
Cleaning Water Tank and Humidity Disk
Turn the power off, and disconnect the power cable from the receptacle before cleaning the product.
Water tank and moisture disk
1
Separate the top section of the body from the product.
Make use of the handle on the top of the product to separate the water tank and the
housing from the body as shown on the figure.
2
Separate the water tank from the housing.
3
Separate the moisture disk from the water tank.
Use the handle mounted on the moisture disk.
• Inadequate disassembling/assembling of the moisture disk may
Caution
generate abnormal noise.
• Small quantity of water is remained in the water tank even if Low
Water Level indicator lights. Never forget to drain remaining water
when cleaning the product.
• If the moisture disk and the water tank are not cleaned, contaminants
built on the surface of the moisture surface and the bottom of the
water tank are melted to cause foul odor.
Owner's Manual
27
Advertisement
Table of Contents
