Name Of Each Part; Installation Method - LG PVDSMN000 Installation & Owner's Manual

NAME OF EACH PART

① Main connector : Power input and
communication connector with
Outdoor unit
② SW104 : Rotary Switch for setting
Demand control step
③ Digital Output : Operating & Error sta-
tus Relay output (250V, 1A)
④ SW102 : Switch for setting internal
function
⑤ Digital Input : Dry contact input
⑥ Analog Input : DC 0 ~ 10 V Analog
signal input
⑦ Analog Output : DC 0 ~ 10 V Analog
signal output
⑧ SW103 : Reset Switch
⑨ SW101 : Dip Switch for setting operat-
ing function
INSTALLATION
METHOD
① Separate front panel from outdoor unit.
② Separate front cover of control box.
③ Assemble IO Module and bracket.
④ Fix the bracket on designated location with
two clamp cords(105mm).
⑤ Connect the connection wires according to the
instructions. (Please refer to Setting and Using
Method)
NAME OF EACH PART
U X 3
+
Main board connector
Be sure to turn off outdoor unit power
before installation.
⑥ Fix and fasten components and cables.
⑦ Perform the switch setting according to the
instructions.
Using 105mm clamp cords, fasten the core as
below.
3
+