Names And Functions; Switches And Rear Side - Panasonic YD-350GL4 Operating Instructions Manual

5. Names and functions
5.1 Switches and rear side
CAUTION
① ②
②
①
③
①
(-) base metal connection
● Connect the base metal cable to the "(-) base metal terminal" with the attached
M10 bolt.
②
( ＋ ) welding gun cable connection
● Connect the power cable drawn from the wire feeder to the (+) torch terminal
③
● Please firmly connect the socket with the wire feeder
※ 1 for details of wire feeder（

Names and functions

About power switch:
When the power switch is turned off automatically, do not turn it on again.
●
(Consult with sales distributor of Panasonic representatives.)
When activating a power generator, turn off the power switch.
●
Power
● The connection and disconnection operation of the
source
power source
switch
・Turn the power source switch knob clockwise to connect
power source. About one 1 second later, LED display
shows software version information.
・The software version is shown for about 4 seconds. Then
AC contactor is switched on and cooling fan starts to
rotate.
with the attached M10
control cable socket ( 16 cored )
Section 4.1), please refer to the operation manual before use.
bolt.
10
※
1
16 cored cable.