iBAT 2.0-CIM01C2
User Manual
Replacing an iBAT
Figure 7-3 Replacing an iBAT
Reference No.: Indicates the reference node number corresponding to the operation type.
Example: There are three iBATs in the network and they are numbered 1, 2, and 3. Choose
Replace an iBAT and set Reference No. to 2. After the operation, the network parameters of
the number 2 iBAT are cleared, and number 2 is reserved.
Figure 7-4 Schematic diagram
Deleting an iBAT
Figure 7-5 Deleting an iBAT
Reference No.: Indicates the reference node number corresponding to the operation type.
Example: There are three iBATs in the network and they are numbered 1, 2, and 3. Choose
Delete an iBAT and set Reference No. to 2. After the operation, the network parameters of
the number 2 iBAT are cleared, and the iBAT number 3 changes to 2.
Issue 07 (2019-01-02)
Copyright © Huawei Technologies Co., Ltd.
7 iBAT Networking Configuration
53