Selecting The Audio Languages; Selecting The Digital Output Format; Checking The Digital Signal Strength; Displaying Tv Status Information On-Screen - Toshiba 42HP66 Owner's Manual

Selecting the audio languages

When two or more audio languages are included in a digital signal, you
can select one of the audio languages.
To select the audio language:
1. Press TV to select the TV mode.
2. Press MENU, then press
display the AUDIO menu.
3. Press ▲ or ▼ to highlight AUDIO
LANGUAGE, then press
4. Press ▲ or ▼ to select the desired
language, then press ENTER.
5. Press EXIT to return to normal viewing.

Selecting the digital output format

You can choose the format of the digital audio output signal.
To select the digital output format:
1. Press TV to select the TV mode.
2. Press MENU, then press
display the AUDIO menu.
3. Press ▲ or ▼ to highlight DIGITAL
OUTPUT.
4. Press or
DOLBY* DIGITAL.
5. Press EXIT to return to normal viewing.
* Manufactured under license from Dolby Laboratories. Dolby and the double-D
symbol are trademarks of Dolby Laboratories.

Checking the digital signal strength

You can check the strength of the digital signal by viewing the digital
signal meter.
To view the digital signal meter:
1. Press TV to select the TV mode.
2. Press MENU, then press
to display the SETUP menu.
3. Press ▲ or ▼ to highlight SIGNAL
METER.
4. Press or
signal strength.
5. Press EXIT to return to the normal
screen.

Displaying TV status information on-screen

Press DISPLAY to display the following information on-screen:
Analog channel:
• Clock
• Channel number or VIDEO mode
selected
• Channel label (if set)
• Stereo or SAP (second audio
program) audio status
• Content rating
• On timer, Sleep timer (if set)
• Picture size, Picture format
Digital channel:
• Clock
• Channel number, station name,
program name
• Remaining time • Audio language
• Content rating
• Closed Caption mark • V-Chip mark
3X70701A_En_p42-45 44
or to
A U D I O
A U D I O L A N G U A G E
D I G I TA L O U T P U T
R E S E T
.
S E L E C T
or to
A U D I O
A U D I O L A N G U A G E
D I G I TA L O U T P U T
R E S E T
to highlight PCM or
S E L E C T
or
S I G N A L M E T E R
C H A N N E L ( D I G I TA L )
to check the digital-
S T E R E O
S A P
T V- P G
O N T I M E R
S L E E P T I M E R 2 h 0 0 m
N AT U R A L
4 8 0 i
51-3
CITYHD
No program information is available.
• HD or SD mark
P C M
A D J U S T
P C M
P C M / D O L B Y D I G I TA L
A D J U S T
Notes:
• The signal meter feature is not available for
analog channels.
• After approximately 4 minutes, the SIGNAL
METER screen will return to normal TV
operation automatically.
• When you select a vacant channel, the
1 - 0 0 1
8 0
signal meter may react.
Note:
• Analog channel status will display on the
screen for approx. 4 seconds.
• Digital channel status will display on the
L V
1 2 : 0 0 A M
screen for approx. 10 seconds. Press
RECALL again, the analog channel status
A N T
A B C D
will display.
C A B L E
7
C L O C K 1 2 : 0 0 A M S U N
SUN Jan 01 12:00 PM
M o o n S t a r
Note:
Remaining Time 0:20 TV-Y7 English
HD CC
If the remote control does not operate your TV,
press the "TV" button on the remote control
and try again.
44
3/7/06, 6:25 PM
INPUT DISPLAY
Display
TV
Menu/Enter
Exit