Toshiba HDD-J35 Owner's Manual page 28

6.
You will see the Main Menu (page 33). Press the " " button twice to highlight "INSTALLATION" and then
press "ENTER". When prompted, enter "0000" which is the default password.
7.
To tune the recorder, you have choices of MANUAL SETUP / AUTO SCAN / QUICK SCAN. We recommend
that you use "QUICK SCAN" (page 34) for a faster setup. For more information on the various tuning options,
refer to pages 34~35.
Note: The choices of AUTO SCAN and QUICK SCAN are for Australia only.
8.
If you use "QUICK SCAN" in step 7 and when you see the message ">>> SCAN COMPLETE <<<", press
the "EXIT" button several times until the main menu disappears.
9.
After you finish scanning, you can choose the suitable V.FORMAT. If you use an SDTV, use the V.FORMAT
"576i"; If you use a HD-ready TV, you are recommended to change to "AUTO" by pressing V.FORMAT button;
However, if your HD-ready TV cannot display some specific video format, press V.FORMAT button to change to
an appropriate fixed format.
10.
Congratulations! You have successfully setup your recorder.
28