Table of Contents
Advertisement
Quick Links
AIR-DISCHARGE DIRECTION KIT FOR AIR CONDITIONER (SPLIT TYPE)
Installation Manual
Air-Discharge Direction Kit
(for 4-way air discharge cassette Type)
Model name:
Air-discharge direction kit
TCB-BC1602UUL
Installation Manual
Air-discharge direction kit
Manuel du proprietaire
Climatiseur
(Type à deux éléments)
English
1
Français
7
Advertisement
Table of Contents
Related Manuals for Toshiba CARRIER TCB-BC1602UUL
Summary of Contents for Toshiba CARRIER TCB-BC1602UUL
-
Page 1: Installation Manual
AIR-DISCHARGE DIRECTION KIT FOR AIR CONDITIONER (SPLIT TYPE) Installation Manual Air-Discharge Direction Kit (for 4-way air discharge cassette Type) Model name: Air-discharge direction kit TCB-BC1602UUL Installation Manual Air-discharge direction kit Manuel du proprietaire Climatiseur (Type à deux éléments) English Français... - Page 2 Air-dischage direction kit • Thank you for purchasing the “Air-discharge direction kit” of TOSHIBA/Carrier Air Conditioner. Before starting the installation work, please read this manual carefully and install the product properly. • As for the “Safety precaution”, please read the installation manual and the instruction manual for the 4-way air discharge cassette type air conditioner (indoor unit) carefully, and also read the installation manual supplied with the ceiling panel carefully.
-
Page 3: Installation Methods
Air-dischage direction kit INSTALLATION METHODS • Before installing the wind shield, change the air conditioner settings. Refer to “Changing the setting” on page 4. • Unless the setting is changed, the air blow temperature becomes low. This may cause the dew condensation. Installing the wind shield(s) and packings •... -
Page 4: Installing The Indoor Unit
Air-dischage direction kit Installing the indoor unit • Install the indoor unit (Install the indoor unit following the instructions described on the installation manual of the indoor unit.) • Block the air flow outlets following the air flow blocking pattern shown in the table below when controlling 3-way or 2-way air flow. -
Page 5: Changing The Setting
Air-dischage direction kit Changing the setting • The setting is changed by using a wired remote controller. (For the details, Refer to “Changing procedure” described below.) • Perform “ Setting the louver lock (Louver position fixing)”. When the ceiling is higher than the specification, the fan control is required. So, in that case, perform the “high ceiling setting”... -
Page 6: Confirming The Installation
Air-dischage direction kit Setting the louver lock (Louver position fixing) • Fix the louver at the air flow blockage portions. (For the setting methods, follow the procedures below.) Push the LOUVER 4 seconds while the air conditioner is stopped. blinks. Push the UNIT unit you want to set. - Page 7 Air-dischage direction kit MEMO – 6 – Installation Manual...
- Page 8 EH99678401...