Advertisement
Channel and Program tuning in digital television differs
from conventional television. With DTV, many programs
can exist within a single 6 MHz channel. These channels
behave as sub-channels within a single channel. When
tuning to a digital channel, the unit will also tune to a
program and will indicate the channel and program in the
on-screen Channel Banner display.
In order to select channels properly, Auto program must
be performed. (p. 26-27)
Follow the procedure below to directly enter the channel
number using the NUMBER keys.
PFoce([lIFe
1. Press
the NUMBER
keys to enter
the Channel
number.
Press
OK.
• The following
is an example
of tuning
to channel
15.
Direct
Tuning
Example
Step
Action'
Channei Banner Display
1
Press 1
1
2
Press 5
15
3
Press OK
15
• If, during
channel
selection,
no action
is taken
for several
seconds,
the Channel
Banner
is exited
and the currently
input
channel
is automatically
selected.
Pt'oced_Fe
1. If tuning
a digital
channel
and your
channel
contains
more
than one program,
press
PROG-
and enter
the program
(1, 2, 3 etc.)
using
the NUMBER
keys.
Press
OK.
• The following
is an example
of tuning
to channel
15-1.
Direct
Tuning
Example
step
'
Action
1
Press
1
2
Press 5
3
Press PROG-
4
Press
1
5
Press OK
Channel Banner Display
1
15
15-
15-1
15-1
Press CH ^v or RECALL, except when the MENU
screen is displayed, to display current unit status
information.
Procedblre
1. Press OH ^v to minimize
the displayed
channel
banner.
• [t will display
the channel
number,
and the station
identification
(if available).
Channel
Number
Station
Identifier
PFocedblre
1. Press RECALL
to maximize
the displayed
channel
banner.
Channel, Program and Station identifier
Program title
Closed Caption
Rating Level
Picture mode
Time remaining
in Sleep Timer
SAP indication
Signal resolution
Aspect ratio
Press MUTE to instantly mute the sound. Press again to
restore the previous sound level.
PFocedblre
1. Press MUTE to mute the sound.
Press again
to reactivate
sound.
• Sound
is also reactivated
when
power
is turned
off or
volume
level is changed.
• If, during
channel
selection,
no action
is taken
for several
seconds,
the Channel
Banner
is exited
and the currently
input
channel
is automatically
selected.
• The audio output
from AV OUT is not muted.
30
Advertisement
