16
PWR
CPU Cable
USB
Right-side Components
Workstation Power
Indicator
Temperature
Indicator
Suspend Indicator
Screen Back-light
Indicator
RGB Indicator
Figure 9. 8.4" Display Control Buttons
Power Button
Standby Button
For connecting the power cord from the vehicle battery.
Use a standard Motorola power cable with a 15-Amp fuse.
Connects the display to the CPU box.
Each port connects a USB 1.1 device such a keyboard,
mouse, etc.
Workstation Power Button
Communication Indicator
Suspend Mode
Screen Back-light On/Off &
Buttons illumination Level
Brightness up/down
Volume up/down
On Screen Display (OSD)
Menu
Turns the MW800 power ON and OFF. This button
functions identically as the Power Button on the front panel
of the CPU box. Be aware, the main power switch on the
rear CPU panel, must be switched on before using the
Power Button.
Use this button to go into a low power consumption state
(Standby mode). In Standby mode, the workstation enters a
W orkst ation Po wer
Button / Indicator
page 4
Communi cation
Indicator
page 4
Backl i ght On / Off &
Indi cation In tens it y
Cont r ol
Button / Indicator
page 5
On S cr een Di s play
(OSD) Button /
Indicator page 6
Figure 10. 12.1" Display Control Buttons
T emperatu r e
Indicator
page 4
Su sp end Mode
Button / Indicator
page 5
Bri ghtness & Volume
up / down Control
page 6