Certificates, Directives And Declarations - Siemens SIMATIC Field PG P4 Manual

Important Notes
1.2

Certificates, Directives and Declarations

Notes on the CE Symbol
The following applies to the SIMATIC product described in this operating
instruction:
EMC Directive
This product fulfils the requirements for the EC directive 89/336/EEC on
"electromagnetic compatibility" and the following fields of application apply
according to this CE symbol:
Field of Application
Residential and commercial areas and
small businesses.
Industry
The product is also compliant with the Standards EN 61000-3-2:2000 (Harmonic
currents) and EN 61000-3-3:1995 (Voltage fluctuation and flicker).
Low Voltage Directive
This product fulfils the requirements for the EC directive 73/23/EEC on
"low voltage" and was tested to EN60950.
Declaration of Conformity
The EC declarations of conformity and the documentation relating to this are
available to the authorities concerned, according to the above EC directive, from:
Siemens AG
Bereich Automation and Drives
A&D AS RD4
Postfach 1963
D-92209 Amberg
Tel.: 09621 80 3283
Fax: 09621 80 3278
Observing the Setup Guidelines
The setup guidelines and notes on safety given in the manual must be observed
on startup and during operation.
1-2
Requirement for
Emitted Interference
EN 61000-6-3: 2001 EN 61000-6-1: 2001
EN 61000-6-4: 2001 EN 61000-6-2: 2001
SIMATIC Field PG P4 Manual
Noise Immunity
A5E00180080-04