Displaying And Maintaining Web Login; Web Login Example; Http Login Example - HP A-F1000-E Getting Started Manual

Displaying and maintaining web login

To do...
Display information about web users
Display HTTP state information
Display HTTPS state information

Web login example

HTTP login example

Network requirements
As shown in
is 10.153.17.82/24.
Figure 42 Network diagram for configuring HTTP login
Configuration procedure
Configuration on the device
1.
# Log in to the device via the console port and configure the IP address and mask of the management
Ethernet interface GigabitEthernet 0/1 of the device.
<Firewall> system-view
[Firewall] interface GigabitEthernet0/1
[Firewall-GigabitEthernet0/1] ip address 10.153.17.82 255.255.255.0
[Firewall-GigabitEthernet0/1] quit
# Create a local user named admin, and set the password to admin for the user. Specify the Telnet
service type for the local user, and set the command level to 3 for this user.
[Firewall] local-user admin
[Firewall-luser-admin] service-type web
[Firewall-luser-admin] authorization-attribute level 3
[Firewall-luser-admin] password simple admin
Configuration on the PC
2.
# On the PC, run the web browser. Enter the IP address of the device in the address bar, 192.168.0.58
in this example. The web login page appears, as shown in
Figure 42, the PC is connected to the firewall over an IP network. The IP address of firewall
Use the command...
display web users
display ip http
display ip https
Figure
62
Remarks
Available in any view
Available in any view
Available in any view
43.