8-60.
Go to
paragraph
procedure.
8-61. SPECIAL TEST CONNECTOR FOR 10811A
8-62.
The following paragraphs describe a special 15-pin connector for use in troubleshooting,
alignment and testing of the 10811A. The connector provides the following (See
a.
Two separate input leads for the oscillator circuits power and the oven heaters and controller
circuits.
b.
10 MHz output through a female BNC.
c.
Oven monitor output for connection to a voltmeter.
d.
HC input connection to ground.
8-63.
The following parts are required to construct the special test connector:
a.
15-pin pc board connector (HP part number 1251-0494).
b.
6 banana plugs (HP part number 1251-0124).
c.
BNC female connector with ground lug and nut.
BNC connector
Ground lug
lock washer
Nut
52
8-84, Oscillator Troubleshooting. When reassembling unit, reverse the above
Figure 8-13. 10811A/B Special Test Connector
1250-0083
0360-0024
2190-0016
2950-0001
Model 10811A/B
8-13):
Figure