Installing A Disk Drive - Hitachi AMS 2000 Series Service Manual

Figure 4-8: Removing a Disk Drive from Modular 2U SAS Expansion Unit

Installing a disk drive

Before beginning the procedure, ensure the prerequisites on the previous
page have been met.
NOTE: If you are installing multiple drives, remove only one drive filler at
a time and install a drive in the slot before removing the next drive filler.
1. If you have not already done so, put on an anti-static wrist strap.
2. Unpack the new disk drive and put the drive on an antistatic mat.
3. If you are adding a new disk drive to expand storage capacity, loosen
the mounting screws and remove the filler (dummy disk drive cover)
from the slot where you want to install the new drive. You may note that
cooling air is coming out of the open slot.
Figure 4-7: Removing a Disk Drive
Replacing parts
Hitachi AMS 2000 Family Storage System Service Guide
4–13