Removing and fitting the front fan
In order to remove or fit long component groups or an M.2 module, it is recommended to
remove the front fan under the front panel while working on the device.
Removing the front fan
► Instructions: Open the casing (see
► Disconnect the fan cable from the mainboard.
► Release the detents of the front cover (1).
► Remove the front cover from the casing in the direction of the arrow (2).
► Release the detent (3) and slide the fan away from the casing in the direction of the arrow (4).
You can now remove or install the M.2 module or long modules.
Fujitsu
"Opening the casing", Page
1
1
1
1
2
System expansions
35).
3
4
69