UNIVERGE SV8100
LED Indication
Live LED
Busy LED
(Green)
(Red)
On
On
Flash (1s)
On
Flash (1s)
On
Flash
(100ms)
Off
On
Off
Off
Flash 80ms
(On/Off) x 3/
400ms Off
System Hardware Manual
The CD-4DIOPA provides:
Four (DIOPA) DID trunk circuits or four OPX circuits
Two Blade status LEDs
-48VDC
Refer to the following tables for maximum upgrade capacities of the
CD-4DIOPA blade:
Table 2-6 SV8100 Maximum 9.5" Gateway and 19" System Capacities
– Blades on page 2-13
Table 2-7 SV8100 Maximum 9.5" Base and Expansion System
Capacities – Blades on page 2-15
5.5.2
Installation
The CD-4DIOPA can be installed in any universal slot.
5.5.3
LED Indications
LED indications for the CD-4DIOPA are listed in
CD-4DIOPA LED
function and LED and Operational status. Refer to
CD-4DIOPA Blade on page 4-80
blade.
Table 4-39 CD-4DIOPA LED Indications
Operation Status
System Initializing
The assignment of the unit is refused.
Trouble found during self-diagnostics.
A Channel is busy (use
Normal
another from CH1 ~ CHx).
Operation
All channels are idle.
A Channel is busy (use
Unit Busy
another from CH1 ~ CHx).
All channels are idle.
Downloading firmware.
Indications. Each LED is listed with its associated
for the location of the LEDs on the
–
When you exceed the system
capacity.
When the main software
version is not matched.
–
–
–
–
–
–
Issue 2.0
Table 4-39
Figure 4-30
Remarks
4 - 81