HP ProCurve 5300xl Series Management Manual page 638

Stack Management for the Series 3400cl and 6400cl Switches
Configuring Stack Management
Remove this Member
from the stack.
Figure 13-34. Example of a Commander and Three Switches in a Stack
CLI for "North Sea"
Stack Member
MAC Address of the
Commander for the
Stack to Which
the"North Sea"
Switch Belongs
Figure 13-35. Example of How To Identify the Commander's MAC Address from a Member Switch
13-40
Use show stack view to list the stack Members. For example, suppose that you
wanted to use the Commander to remove the "North Sea" Member from the
following stack:
You would then execute this command to remove the "North Sea" switch from
the stack:
HPswitch(config)# no stack member 3 mac-address 0030c1-
7fc700
where:
• 3 is the "North Sea" Member's switch number (
• is the "North Sea" Member's MAC address
0030c1-7fc700
Using the Member's CLI To Remove the Member from a Stack.
Syntax:
no stack join <mac-addr>
To use this method, you need the Commander's MAC address, which is
available using the show stack command in the Member's CLI. For example:
SN )