Table of Contents
Advertisement
WD600
WD600 belt scale is a low-to-medium capacity scale for light-to-medium belt loading. It is
designed to be inserted into either a flat roll idler (non-troughing) belt conveyor or a flat
pan slider belt conveyor for continuous weighing of dry bulk solids. WD600 is suitable for
monitoring such products as fertilizer, tobacco, animal feed pellets, and sugar.
WD600 belt scale consists of the following:
•
weighbridge (UHMW slider)
•
two precision load cells on mounting pads with weighbridge mounts
WD600 load cells output an electrical signal proportional to load, which is applied to the
selected Siemens belt scale integrator. Thus, weighing is accomplished without
interrupting the process and without affecting the process material.
WD600 is an accurate and repeatable force sensor. Its performance is
Important:
ultimately dependent upon the conveyor system and the quality of the installation and
accuracy of the alignment.
Page 2
WD600 - INSTRUCTION MANUAL
7ML19985KM01
Advertisement
Table of Contents
