Advanced Lan Configuration; Npar Configuration; In Uefi Mode - NEC Express5800 Series Maintenance Manual
Express server
Hide thumbs
Also See for Express5800 Series:
- User manual (574 pages) ,
- Maintenance manual (238 pages) ,
- Installation manual (75 pages)
Table of Contents
Advertisement
Chapter 2 Useful Features
10.
Advanced LAN Configuration
This section describes how to change NIC Partitioning (NPAR) configuration and precautions on using vIO
control feature.
The screen images and messages in this section are subject to change without notice. Substitute as appropriate
when content has been modified.
10.1
NPAR Configuration
This section describes how to change NPAR configuration.
Configuration method depends on Boot mode (UEFI or Legacy) specified in BIOS settings.
Important
10.1.1 In UEFI mode
1. Power on the server.
2. On the POST screen or after NEC logo is displayed, press the <F2> key to launch BIOS SETUP.
3. Select Advanced UEFI Driver Configuration.
4. From the list, select a LAN riser card that is installed to the server.
Main Configuration Page will open.
180
This feature is available when the N8403-082F or N8403-083F 10GbE (2ch) riser card
is installed.
With N8403-081F installed, this feature is unavailable.
Express5800/B120f Maintenance Guide
10. Advanced LAN Configuration
Advertisement
Table of Contents
