GE Baker Hughes Masoneilan SVI FF Installation And Operation Manual page 243

Engineer
Control Builder
This approach provides a simple and reliable way to monitor the device status. The Block Error
parameter is part of the Resource or Transducer block dynamic views and most hosts read
the dynamic parameters on a regular basis.
The BLOCK_ERR parameter reports also FF standard errors, including:
Block Configuration
Simulate Active
Memory Failure
Static Data Lost, etc.
The disadvantage of this approach is that it creates additional traffic on the bus – the host is
polling the device on a regular basis.
© 2019 Baker Hughes, a GE company, LLC. All rights reserved.
Operate
Historian
Process Portal
Figure 92 Diagnostic Events Block Errors
The icons
above are
from the SVI
FF DTM.
Masoneilan SVI FF Instruction Manual
| 243
=