Table of Contents
Advertisement
All electrical work must be carried out
by a suitably qualified and competent
person in strict accordance with current
local and national safety regulations.
Connection of the ProLine appliance to
the mains must be made via a suitable
switched electrical socket. This will
make it easier for service technicians
should the appliance need to be
repaired. The socket must be easily
accessible after the ProLine appliance
has been installed.
Electrical connection
Risk of damage from incorrect
connection.
Danger of injury! Miele cannot be
held liable for unauthorised
installation, maintenance and repair
work as this can be dangerous to
users.
Miele cannot be held liable for
damage or injury (e.g. electric shock)
caused by incorrect installation,
maintenance or repair work, or by an
inadequate or faulty earthing system.
If the plug has been removed or the
connection cable is not supplied with
a plug, the ProLine appliance must
be connected to the electricity
supply by a suitably qualified and
competent electrician.
If the appliance is to be hard-wired,
an additional means of
disconnection must be provided for
all poles in accordance with the
wiring rules. When switched off,
there must be an all-pole contact
gap of at least 3 mm in the switch
(including switch, fuses and relays).
Connection data is shown on the
data plate. It must match the mains
electricity supply.
After installation, ensure that all
electrical components are shielded
and cannot be accessed by users.
Total power output
See data plate.
Connection
AC 230 V, 50 Hz
49
Advertisement
Table of Contents
