Siemens SINUMERIK 840D Operator's Manual page 378

7
"Services" Operating Area
7.5 Operation
Data in
Data out
Series
start-up
Manage
data
Log
Data
selection
Interface
RS-232
PG
Disk
7-378
Horizontal softkeys
Read in archives/files
· V.24
· PG
· Diskette (if available)
· Archive from (directory "archive" on the hard disk)
Read out archives/files
· V.24
· PG
· Diskette (if available)
· Archive to (directory "archive" on the hard disk)
You can archive data for a series start-up. The softkey is password-
protected.
Files/directories can be created, loaded, saved, deleted or copied and
their attributes can be displayed/changed.
Current actions, errors and any prompts are displayed in the job list.
Prompts must be acknowledged. The "Job log for PG" lists, for
example, errors that have occurred in data transmission from/to the
PG.
Under softkey "Data selection", you can choose the directories that
you wish to have displayed in the "Services" basic display.
You can set the interface parameters for the COM1 and COM2
interfaces under this softkey (see also Section "Interface
parameters").
Vertical softkeys
The vertical softkeys allow you to select the source area (for data
import) or the target area (for data export). The yellow title in the
window indicates the area.
· V.24 (RS-232)
· PG
· Disk
SINUMERIK 840D/840Di/810D Operator's Guide HMI Advanced (BAD) – 03.04 Edition
7
03.04
Ó Siemens AG, 2004. All rights reserved