Starting The Installation - Siemens HiPath 3000 Series Service Documentation

start_h5.fm
Startup and Administration HiPath 5000
Starting HiPath 5000
6.6.3.3

Starting the Installation

A TAPI service provider must be installed on the relevant PC to enable the default setup to be
performed. Installation information can be found in Section 6.6.5.
Procedure
1. Insert the installation DVD.
The installation program is started via the autorun function. Alternatively you can initiate
Setup via Windows Explorer under <DVD drive let-
ter>:\HiPath5000RSM...\setup.exe.
2. Select the language you require for the Setup browser. German (Germany) and English
(USA) versions are currently available. Click OK.
The system is prepared for installation.
3. Click Next to start the installation routine.
Important installation information is displayed.
This includes the latest information on installation. Please read this information carefully.
4. Click Next to proceed with the installation routine.
5. Select destination path.
Select the folder where you want to install the program.
Confirm the default folder c:\program files\siemens\hipath\ with Next or click
Browse and select a different folder.
6. Select program folder.
Select the location where the setup should create the new shortcuts.
Confirm the default folder HiPath with Next or select a different folder.
6-20
Nur für den internen Gebrauch
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation