Electra Elite
System Hardware Manual
Serial-port characteristics include:
Baud Rate
Parity
Stop Bit
Data Bit
Port Type
Figure 7-67 Connecting a PC to the KSU
3.16.2
Connecting the Printer to the KSU
When using the charge control ability, connect the printer
to the KSU to allow the printing of the charge data.
Connect the printer to the serial port on the side of the
KSU with an RS-232C straight cable. Use the COM 2 port
to connect the printer.
Characteristic
Issue 6
Value
38.4 K
(maximum)
None
1 stop bit
8 bits
DCE
7 - 51