Power (Ignition) Switch (Vehicles Without A; Entry & Start System); (Vehicles Without A Smart Entry & Start System) - Toyota Yaris HV 2017 Manual

216
4-2. Driving procedures

Power (ignition) switch (vehicles without a

smart entry & start system)
Starting the hybrid system
1
Check that the parking brake is set.
2 Check that the shift lever is in P.
3
Firmly depress the brake pedal.
4
Turn the power switch to the
"START" position to start the
hybrid system.
If the "READY" indicator turns on,
the hybrid system will operate nor-
mally.
Continue depressing the brake
pedal until the "READY" indicator
is illuminated.
5
Check that the "READY" indicator is illuminated.
If the "READY" indicator changes from a flashing light to a solid light and a
beep sound, the hybrid system is starting normally.
The vehicle will not move when the "READY" indicator is off.
The vehicle can move when the "READY" indicator is on even if the engine
is stopped. (The engine starts or stops automatically in accordance with
the state of the vehicle.)
YARIS_HV_OM_Europe_OM52G33E