Table of Contents
Advertisement
EFFECT PANEL
5)
Deleting a step
5.1) Deleting a step from the EFFECT PANEL
Operating procedure
(1) Select a PATTERN number.
Press the PATT button. The PATT button lights up.
1)
2) Press the
(2) Select a STEP number.
1)
Press the STEP button. The PATT button goes out and the STEP
button lights up.
2) Press the
(3) Delete the step. Make sure that the STEP button is lit.
Press the DEL button.
1)
The DEL button lights up and the STEP button flashes.
2) Press the REC button.
When the REC button is pressed, the DEL button goes out and the step is deleted.
To stop the step deletion, press the EDIT button.
In this case, edit mode is not entered.
Pressing the DEL button again while it is lit makes the DEL button go out and
cancels the deletion request.
[DEL button LED display status]
ON
: Confirming step or pattern deletion
or
button to select a PATTERN number.
or
button to select a STEP number.
5-7
Advertisement
Table of Contents
