Operation
Danger of injury caused by im-
plosion.
Damage and cracks in jars or glass/
twist-off lids can cause implosion.
Only vacuum jars and lids which are
in perfect condition.
Only vacuum jars on vacuum set-
ting 1 or 2.
Damage caused by deformation
of glass lids.
The glass lid may become deformed
due to the negative pressure that oc-
curs.
Only vacuum seal jars up to a max-
imum height of 8 cm in order to
maintain a safety gap of at least
1 cm between the lid on the jar and
the glass lid on the drawer.
24
Vacuum sealing preserving jars
and jars with twist-off lids
Close the jar with its appropriate lid
and rubber seal or with the twist-off
lid.
Open the drawer and the glass lid.
Place the jar in the vacuum chamber.
Switch the drawer on with the
sensor control.
The and sensor controls light up.
Touch the sensor control re-
peatedly until the segment for va-
cuum setting 1 or 2 lights up.
Touch the sensor control re-
peatedly until the segment for sealing
level 1 lights up.
Close the glass lid and press it down
lightly.
The vacuuming process will start.