Switching
(1) Secure the Switching Power Supply
Power Supply
(75W)
Installation
(2) Connect Cable No. (5), (11) with the Switching Power Supply (75W).
(3) Place the bottom panel and secure it using 16 screws.
(4) Put the Controller back to the original position.
(5) Secure the fixing plate using 3 screws (M4 pan head).
(6) Plug in the power connector. Turn ON the Controller and make sure that the
RC620 Rev.8
Maintenance 6. Maintenance Parts Replacement Procedures
(75W) to the Controller using 4 screws.
Refer to the photo for the direction of
the Switching Power Supply.
Refer to Maintenance: 3.2 Diagram of Cable Connections.
Controller starts properly without any vibration or abnormal noise.
191