Sony DVS-9000 User Manual page 202

4
5
202
Key Setting Operations Using Menus
Set the parameters.
• When a luminance key or linear key is selected
Knob Parameter Adjustment
1 Clip Reference level for generating the
key signal
2 Gain Key sensitivity
3 Density Key density
4 Filter Filter coefficient
a) Setting this value to 1, produces the "through" state in which no filter is applied. The larger
the value, the more strongly the filter applies.
• When a chroma key is selected
Knob Parameter Adjustment
3 Density Key density
• When a color vector key is selected
Knob Parameter Adjustment
1 Y Clip Reference level for creating
luminance signal
2 Y Gain Luminance signal sensitivity
3 C Clip Reference level for creating
chrominance signal
4 C Gain Chrominance signal sensitivity
5 Density Key density
6 Y Filter Luminance signal filter coefficient 1 to 9
7 C Filter Chrominance signal filter
coefficient
• When a wipe pattern key or key wipe pattern key is selected
Knob Parameter Adjustment
1 Size Pattern size
2 Soft Degree of edge softness
3 Density Key density
Make the following settings as required.
To invert the black/white sense of the key source: Press [Key Invert],
turning it on.
Setting values
.30 to 109.58
100.00 to +100.00
0.00 to 100.00
a)
1 to 9
Setting values
0.00 to 100.00
Setting values
7.30 to +109.58
100.00 to +100.00
0.00 to 100.00
100.00 to +100.00
0.00 to 100.00
1 to 9
Setting values
0.00 to 100.00
0.00 to 100.00
0.00 to 100.00