Connecting To A Computer - Sony VPL-AW10 Operating Instructions (VPLAW10 and VPLAW15) Operating Instructions Manual

Connecting to a Computer

Rear of the projector
: Video signal flow
Tip
Set "Input-A Signal Sel." in the Setup
not appear properly, set it to "Computer." (1 page 47, 54)
Note
If you set your computer, such as a notebook type, to output the signal to both computer's display
and this equipment, the picture of the equipment may not appear properly. Set your computer to
output the signal to only the external monitor.
For details, refer to the computer's operating instructions supplied with your computer.
20
HD-Dsub15 pin cable (optional) or HDMI cable (optional)
When using an optional HDMI cable, be sure to use
a cable that has acquired an HDMI logo.
menu to "Auto" or "Computer." If the input signal does
Computer
to monitor output