Accessing from the Computer
1
Start a browser of the computer
(Internet Explorer 5.0 or higher).
2
Enter the address "http://
xxx.xxx.xxx.xxx" (IP Address of the
projector), to establish access to the
projector.
Note
If the browser of your computer is set to
[Use a proxy server] when you have access
to the projector from your computer, click
the check mark to set accessing without
using a proxy server.
After you have established access to the
projector, the following window
appears:
30
Monitoring and Operating the Projector Using a Web Browser
Confirming the Information
regarding the Projector—
Information
Click [Information].
You can confirm the current settings of the
projector on the computer. You cannot
change the settings of the computer with this
window.