Bosch ACS 561 Repair Instructions page 21

ACS 561 Service Manual
2. Press Start (F1).
3. Enter the weight (0.0 kg recommended)
using the keypad. When finished press
Continue (F1) to save the entered weight
value. The following will be displayed:
After 5 seconds:
Robert Bosch GmbH
Diagnostics and Testing
4. Enter the second weight (10-20 kg reco-
mended) using the keypad. When finished
press Continue (F1) to save the entered
weight value. The following is displayed:
5. If the calibration is accepted, the offset and
slope will be calculated. If either calculation
fails a fail screen for the offset or slope will
be displayed.
Offset Failure:
Slope Failure:
The operator is given the opportunity to
retry the calculation or to exit the calibration
function.
If the caibration is accepted, add 1 kg on top
of the second weight when prompted.
21
SP00D00517 2018-07-11