Names and Functions of Parts
2.2 Analog Output Unit (FP0R-DA4)
2.2.1 Names and Functions of Parts
Names and Functions of Parts
No.
Name
①
Mode setting
switch
Voltage output
②
terminal
for CH0-CH3
Current output
③
terminal
for CH0-CH3
④
Power connector
Expansion
⑤
connector
DIN rail installing
⑥
groove
⑦
DIN hook
⑧
Expansion hook
2-4
Description
Used for selecting the output range and the output method (voltage/current).
Used for selecting the operation mode (12-bit mode or 14-bit mode compatible
with the conventional product FP0-A04V/A04I).
Used for connecting the analog output device.
The voltage and current vary according to the settings of the mode switch.
They can be selected for each channel.
24 V DC is supplied from an external power supply.For connection, use the power
supply cable (AFP0581) that comes with the Unit.
Used for connecting the expansion unit with the internal circuit of the Control Unit.
It can be installed to a 35-mm-wide DIN rail.
The unit can be installed to the DIN rail through one-touch operation.
This hook is also used for installing the unit to the Slim Type Mounting Plate
(AFP0803).
Used for securing expansion units.