7.8.
UTILITY-DIAGNOSTIC
Diagnostic is used to diagnose the following hardware of VPS.
- Codec/DSP Voice Path: diagnoses whether the voice path between Codec and DSP functions properly.
- Play/Record Voice Path: diagnoses whether the voice path in the playing/recording unit functions properly.
Follow the steps below for System Diagnostic:
1. Click Utility in the menu bar.
2. Select Diagnostic.
3. If there are active ports, the System Administrator will be asked to either to continue or to cancel.
Select OK to continue, or Cancel to close the ports.
4. Select Codec/DSP Voice Path or Play/Record Voice Path.
5. Diagnosis starts.
7.9.
UTILITY-PROGRAMMER CODE
The System Administrator can change the system password that is needed to use KX-TVM Maintenance Console.
Follow the steps below to change the system password:
1. Click Utility in the menu bar.
2. Select Programmer Code.
3. Enter a new password in Enter new password:.
4. Enter the new password in Confirm new password:.
5. Click OK.
7.10. UTILITY-COMMAND
The System Administrator can enter commands to maintain the system without closing KX-TVM Maintenance Console.
Follow the steps below for Commands:
1. Click Utility in the menu bar.
2. Select Commands.
(You can click the icon in the tool bar instead of step 1 and 2.)
3. Enter commands.
4. Click File or Close.
(Click Log? to save the command sessions in text file as your needs.)
7.11. UTILITY-SOFTWARE VERSION
Software Version is used to display the version of main software and DSP software for reference.
Follow the steps below to display the software version:
1. Click Utility in the menu bar.
2. Select Software Version.
3. Click OK.
63
KX-TVM200E / KX-TVM200NE