Sony 3-213-480-12(1) Operating Instructions Manual page 91

4
Press TOP MENU or TITLE LIST to select a
title.
5
Start playing the DVD, and then press x
(stop) or X (pause) at the point where you
want to start dubbing.
To select DVD sound, language, or subtitle,
press AUDIO or SUBTITLE during playback
(see page 36).
6
Press DVD t on the recorder.
Dubbing starts.
To stop dubbing
Press x.
Note that it may take a few seconds for the
recorder to stop dubbing.
To dub using the on-screen menu
1
After step 5 above, press SYSTEM MENU.
2
Select "Dubbing" from the System Menu, and
press ENTER.
3
Select "Simple Dubbing," and press ENTER.
Dubbing
Title List
Simple Dubbing
Program Dubbing
Timer
DV Dubbing
Edit
Dubbing
Disc Setting
4
Select "DVD t VIDEO," and press ENTER.
The display asks for confirmation.
5
Select "Yes," and press ENTER.
Dubbing starts.
If the disc's menu appears when DVD
playback finishes, press x to stop dubbing.
Otherwise the disc's menu is recorded until
the tape reaches its end.
z Hints
• The brightness of the playback picture may differ from
normal DVD playback picture.
• The DVD playback time may differ slightly from the
VHS tape counter value.
• The sound being played back (main, sub, etc.) is the
dubbed sound.
Notes
• Dubbing cannot be made when "Progressive" is set to
"On" in the "Video" setup (page 104).
• Dubbing stops when:
10:10
VIDEO --> DVD
DVD --> VIDEO
– the DVD is played back to the end and stops.
– the DVD deck or the VHS video deck is stopped.
– the tape remaining time runs out.
• The System Menu, OPTIONS menu, and information
display are not displayed during dubbing.
• Copyrights
– Recordings made from discs and other copyrighted
material are solely for individual enjoyment, and
other unauthorized use is prohibited under copyright
law.
– Unauthorized editing of copyrighted material is
prohibited under copyright law.
Dubbing selected titles and scenes
(Programme Dubbing)
You can select titles or scenes from a DVD, and
dub the contents to a VHS tape all at once.
1
Press VIDEO and insert a VHS tape with its
safety tab in place.
To select the recording mode, SP or LP, press
REC MODE repeatedly.
2
Press DVD and insert a source disc.
To select DVD sound, language, or subtitle,
press AUDIO or SUBTITLE during playback
(see page 36).
3
Press SYSTEM MENU.
The System Menu appears.
4
Select "Dubbing," and press ENTER.
Dubbing
Title List
Simple Dubbing
Program Dubbing
Timer
DV Dubbing
Edit
Dubbing
Disc Setting
Setup
5
Select "Program Dubbing," and press
ENTER.
Program Dubbing
Title List
Create Dubbing List
Program Dubbing List
Timer
Edit
Dubbing
Disc Setting
Setup
10:10
10:10
,continued 91