Introduction to the example
1.4 Requirements
1.4
Requirements
Requirements for the Example
The following hardware and software is available for processing the example:
Table 1- 2
Hardware/software requirements
Hardware/software
2 H-CPUs with synchroniza-
tion modules and SIMATIC
Memory Cards
3 ET 200SP distributed I/O
systems
2 HMI devices
2 load current supplies for
S7-1500R/H
3 load current supplies for
ET 200SP
Accessories
PC/PG with Engineering-
System
Switch for the connection of
the PG/PC
12
Modules//Versions
2 identical 1517H-3 PN CPUs with identical article numbers, function versions and firm-
•
ware version
4 synchronization modules for cables up to 10 km in length (6ES7960-1FB00-0AA5)
•
2 SIMATIC Memory Cards e.g. with 256 Mbyte capacity (6ES7954-8LL02-0AA0)
•
2 ET 200SP for tunnel sections 1 and 3 each consisting of:
1 interface module IM 155-6 PN HF (6ES7155-6AU01-0CN0), FW version V4.2 or later
•
(with system redundancy S2)
4 digital output modules:
•
–
2 DQ 4x24VDC/2A ST each with a light-colored BaseUnit, BU type A0: BU15-
P16+A0+2D
–
1 DQ 4x24VDC/2A ST with a dark-colored BaseUnit, BU type A0: BU15-P16+A0+2B
–
1 DQ 4x24..230VAC/2A HF with a light-colored BaseUnit, BU type U0: BU20-
P16+A0+2D
1 analog input module:
•
–
AI 4xU/I 2-wire ST with a dark-colored BaseUnit, BU type A0: BU15-P16+A0+2B
1 server module
•
1 ET 200SP for tunnel section 2 consisting of:
1 interface module IM 155-6 PN HF (6ES7155-6AU01-0CN0), FW version V4.2 or later
•
(with system redundancy S2)
2 digital output modules:
•
–
1 DQ 4x24VDC/2A ST with a light-colored BaseUnit, BU type A0: BU15-P16+A0+2D
–
1 DQ 4x24..230VAC/2A HF with a light-colored BaseUnit, BU type U0: BU20-
P16+A0+2D
1 analog input module:
•
–
AI 4xU/I 2-wire ST with a dark-colored BaseUnit, BU type A0: BU15-P16+A0+2B
1 server module
•
TP1900 Comfort
PM 190 W 120/230 V AC
Load current supplies with 24 V DC output voltage (with safe electrical isolation)
1 mounting rail, 2 fiber-optic cables, PROFINET cables
PG/PC with Ethernet interface and the following correctly installed software package:
SIMATIC STEP 7 Professional, V15.1 or later
•
SCALANCE X-204IRT
S7-1500R/H redundant system
Getting Started, 10/2018, A5E44910930-AA