Bar Code/2D Code Characters (By Ascii And Shift-Jis Code): Brs - Panasonic LP-GS Series Serial Communication Command Manual

3-7-2 Bar code/2D code characters (by ASCII and Shift-JIS code): BRS

Sets the characters to encode of the bar code/2D code objects. Characters including control codes (specified with 2-byte
alternative codes), alpha-numeric, functional characters, and Japanese characters are available.
⿎ Setting request data / response data for readout
Start
BRS
code command
Sub command is "S" for the setting request data and "A" for the response data for readout.
⿎ Readout request data
Start
BRS
code
⿎ Data description
Name Data length
(> Name in LP-400/V)
Object No.
(> Bar code No.)
String No.
Code data
Total data length
Sub [Object No.] [String No.] [Code data]
Max. 62-byte or Max. 63-byte
[Object No.] [String No.]
R 2-byte or
3-byte (2D side of composite code)
Data contents
[byte]
1 "0"–"7": Object No. 1100 to 1107
For bar code/ 1D side of composite
code:
"1"–"2"
1
For 2D code:
or
"1"–"9"
2
For 2D side of composite code:
"01"–"09"
Min. 0 Input Method: ASCII code or Shift
Max. 60 JIS code (can be mixed)
Max. 62 Variable length.
or • For bar code/2D code/1D side of composite code: Max. 62-byte
Max. 63 • For 2D side of composite code: Max. 63-byte
ME-LP-GS-SR-COMP-3
(Check
End code
sum)
(Check
End code
sum)
Remarks
• The string No. is applied to the linefeed
of the human readable character. The
linefeed is not included in the code data.
• If the code data length is more than 60-
byte, set the character in the several
string No. They are connected together
in numerical order without linefeed to
create the code data.
• For EAN/UPC/JAN or 1D side of GS1
DataBar Limited/Stacked, set "1" always.
• Only for 2D side of the composite code,
set this item with 2-byte length.
• Use the ASCII code to specify functional
characters.
• Use the Shift JIS code to specify two-
byte characters (double byte characters).
• For the characters that can be specified
in ASCII code, you can use both ASCII
code and Shift-JIS code.
• Specify 0-byte for data length to delete
characters.
• For response data for readout, all
characters except the functional
characters are readout in 2-byte
characters (Shift-JIS code) regardless
the settings.
89