General Information - Siemens SINAMICS G130 Operating Instructions Manual

General information

The TM150 Terminal Module is a DRIVE-CLiQ component for temperature evaluation. The
temperature is measured in a temperature range from -99° C to +250° C for the following
temperature sensors:
● PT100 (with monitoring for wire breakage and short-circuit)
● PT1000 (with monitoring for wire breakage and short-circuit)
● KTY84 (with monitoring for wire breakage and short-circuit)
● PTC (with short-circuit monitoring)
● Bimetallic NC contact (without monitoring)
For the temperature sensor inputs, for each terminal block the evaluation can be
parameterized for 1x2-wire, 2x2-wire, 3-wire or 4-wire. There is no galvanic isolation in the
TM150.
The TM150 is mounted in the control cabinet and can be snapped on to a standard mounting
rail (EN 60715).
The TM150 contains the following interfaces:
Table 2- 1
Type
DRIVE-CLiQ interfaces
Temperature sensor inputs
Electronic power supply
Terminal Module 150 (TM150)
Operating Instructions, 04/2014, A5E03758735A
Overview of the TM150 interfaces
Quantity
2
6/12
1
2
13