GE AKD-10 Application Manual page 47

NEMA 1 indoor — floor plan and cable space details
Note: Refer to installation drawing and AKD-10 switchgear installation manual (DEH-194) for additional information
NOTES:
ΠCABLES ABOVE РAVAILABLE SPACE FOR CABLES REDUCED BY 5.00" (127mm)
IF BUS COMPARTMENT BARRIERS ARE PROVIDED
CABLES BELOW – AVAILABLE SPACE FOR CABLES REDUCED BY 4.00 (101mm)
IF 800-2000A BREAKER IS LOCATED IN BOTTOM COMPARTMENT.
CABLES ABOVE OR BELOW – AVAILABLE SPACE FOR CABLES REDUCED BY
3.00" (76mm) FOR ANY SECTION CONTAINING A 5000A BREAKER
AND BARE 5000A BUS (IF BUS COMPARTMENT BARRIERS ARE
SUPPLIED, SEE NOTE ABOVE)
 SPACE REQUIRED FOR UPPER NEUTRAL WITH LEADS ABOVE OR LOWER
NEUTRAL WITH LEADS BELOW
46
A Direction
Equipment of
Depth Cables
60" Non-fused 19.00
Below
or (482mm)
67" with Fused 24.00
Above
WPF-08 / 16 (609mm)
67" Non-fused 26.00
Below
or (660mm)
74" with Fused 31.00
Above
WPF-08 / 16 (787mm)
74" Non-fused 33.00
Below
or (838mm)
81" with Fused 38.00
Above
WPF-08 / 16 (965mm)
19.00
Below
74" with (482mm)
WPS / WPX-50 24.00
Above
(609mm)
26.00
Below
81" with (660mm)
WPS / WPX-50 31.00
Above
(787mm)
19.00
67" w/ 5000 Amp Bus Below
(482mm)
w/o WPS / WPX-50
24.00
Above
w/o WPF-08 / 16
(609mm)
26.00
74" w/ 5000 Amp Bus
Below
(660mm)
w/o WPS / WPX-50
31.00
w/o WPF-08 / 16
Above
(787mm)
Refer to Table 32.1 and 32.2 for equipment depth options.
Rear P
J Extension Transformer Flange CL
Depth to Rear of Switchgear
26.50
None
(673mm)
7.00 33.50
(177mm) (851mm)
14.00 40.50
(355mm) (1029mm)
26.50
None
(673mm)
7.00 33.50
(177mm) (851mm)
29.50
None
(749mm)
7.00 36.50
(177mm) (927mm)