Sony Glasstron PLM-S700E Operating Instructions Manual page 18

Connecting the Glasstron (continued)
If your video equipment has an S-video jack
Connect the Glasstron to the video equipment using the supplied S-video cable and the audio/
video cable to enjoy the highest quality pictures. In this case, you do not need to connect the video
(yellow) plug. If you connect both the S-video and video plugs, the S-video signal is automatically
selected. When you connect the Glasstron to the video equipment, set the PC-VIDEO switch on the
power supply box to "VIDEO."
S VIDEO
AUDIO / VIDEO
to AUDIO/VIDEO connector
: Signal flow
About the AUDIO/VIDEO input jack
The AUDIO/VIDEO input jack of the
Glasstron is a special minijack, and the signal
connections are aligned as shown on the right.
This alignment may differ depending on the
equipment.
18
-GB
Set the PC-VIDEO switch
to "VIDEO."
Power supply box
S-video cable (supplied)
to S VIDEO connector
Audio/video cable (supplied)
(special miniplug
miniplug)
Audio/video cable (supplied)
(special miniplug
plug)
VCR, Laser disc player, DVD player,
camcorder, etc.
to S-video output
to audio/video output
special
Video (yellow)
Audio L (white)
phono
Audio R (red)
to audio/video outputs
Audio L
Audio R
GND
Video