Suzuki SQ416 Service Manual page 75

7B1-4 AUTOMATIC TRANSMISSION (4 A / T)
1. Selector cable
2. Manual selector assembly
3. Expanding selector cable clip
(For Type-2)
Reverse removal procedure to install manual selector assembly
noting the following instructions.
D Make sure that selector cable clip hold selector cable on manual
selector assembly securely.
D Tighten manual selector assembly mounting bolts as specified
torque.
Tightening torque
Manual selector assembly mounting bolts:
.
18 N m (1.8 kg-m, 13.5 lb-ft)
INSPECTION
Check select lever for smooth and clear-cut movement and position
indicator for correct indication.
For operation of select lever, refer to the figure.