DNC Plant/DNC Cell (FBDN1)
1 Introduction
1.2.5 DNC IFC SINUMERIK
DNC IFC SINUMERIK is used to connect Ethernet-capable CNC machines with
SINUMERIK* to DNC Plant or DNC Cell.
See also: Manual 2 DNC IFC SINUMERIK
1.2.6 DNC Compare
DNC Compare is an option package. With DNC Compare, DNC Plant and DNC
Cell can be extended to include the following functions:
NC program comparison
Different NC program versions are compared.
Differences are highlighted in color.
Fig. 1-3: Result of an NC program comparison
Machine comparisons**:
The system checks whether the NC programs in the SINUMERIK* controller
are identical in terms of name, number and content to the programs that are
already managed by DNC Plant/Cell.
** This function is only available for connections to SINUMERIK* controllers with
PCU50/70. DNC IFC SINUMERIK must also be installed on the SINUMERIK
controller.
Note
The DNC Compare option package can be released in DNC Admin by entering
an 8-digit ID at Tools Options. The ID is included in the scope of delivery of
the option package.
DNC Compare is only required once per DNC Plant/Cell.
FBDN1/1-18
© Siemens AG 2010 All Rights Reserved
Motion Control Information System DNC (FBDN) - 04/10 Edition
05.07