Setting Power Level (Level) - Sony HVL HVL-F56AM Operating Instructions Manual

Setting power level (LEVEL)

The power level for the flash can be adjusted.
1
Press the select button to display "LEVEL" on the data
panel.
• The current level is displayed.
• This step is not required when manual flash is selected. Go to step 2.
2
Press the + or – button to select the power level to be
set.
• With TTL or manual flash photography the power level may be
selected from the following.
1/1, 1/2, 1/4, 1/8, 1/16, 1/32
• With multiple flash photography the power level may be selected
from the following.
1/8, 1/16, 1/32
44