Information About Electromagnetic Compatibility (Emc) And Cable Laying; General - Siemens SINAMICS Series Equipment Manual

Cabinet Configuration and EMC Booksize

7.5 Information about electromagnetic compatibility (EMC) and cable laying

7.5 Information about electromagnetic compatibility (EMC) and
7.5
cable laying
7.5.1

General

EMC requirements can be found in EN 60439-1 and recommendations in EN60204-1. The
EMC installation guide can be obtained using the order number 6FC5297-☐AD30-0AP☐.
For installing components in cabinets, the following conditions must be ensured to comply
with the EMC Directive:
• Operation in TN systems with SINAMICS line filters
• Observance of information about cable shielding and equipotential bonding
• Only the recommended Siemens power and signal cables are used
• Only cables from Siemens must be used for DRIVE-CLiQ connections.
For MOTION-CONNECT cables see catalog D21.1 or D21.2
Caution
No cables or couplings that you have prefabricated yourself must be used for DRIVE-CLiQ
connections.
7-20
Equipment Manuel for Booksize Power Modules
Manual, (GH2), Edition 06.2005, 6SL3097-2AC00-0BP2