Frame By Frame Recording - Cut Recording - Sony DCR-PC115 Operating Instructions Manual

Frame by frame recording – Cut recording
You can make a recording with a stop-motion animated effect using cut recording. To
create this effect, alternately move the subject a little and make a cut recording. We
recommend that you use a tripod, and operate the camcorder using the Remote
Commander after step 4.
(1) In the standby mode, press MENU, then select and decide upon FRAME REC
in with the control button (p. 96).
(2) Select and decide upon ON with the control button.
(3) Press MENU to erase the menu display.
The FRAME REC indicator lights up.
(4) Press START/STOP to start cut recording. The camcorder makes a recording
for about six frames, and returns to recording standby.
(5) Move the subject, and repeat step 4.
To cancel the cut recording
Perform either of the following:
– Set FRAME REC to OFF in the menu settings.
– Set the POWER switch to other than CAMERA.
Note
The proper remaining tape time is not indicated if you use this function continuously.
When using the cut recording function
The last recorded cut is longer than other cuts.
2
CAMERA SET
D ZOOM
16 : 9W I DE
STEADYSHOT
N. S. L I GHT
FRAME REC OFF
I NT. REC ON
FLASH LVL
RETURN
[ MENU ] : END
4
POWER
LOCK
MENU
CAMERA SET
D ZOOM
16 : 9W I DE
STEADYSHOT
N. S. L I GHT
FRAME REC ON
I NT. REC
FLASH LVL
RETURN
[ MENU ] : END
57