Attaching The Cushion - Pioneer KRP-TS01 Operating Instructions Manual

Attaching the Cushion

This part prevents reflection of the cables connected to the
back of the Pioneer display and television on the base cover.
����
Attach it after anchoring the base cover on a flat stable place.
�������
����
�����
����������
In case of KRP-600P / KRP-600M (with side
speakers installed) / PDP-LX6090 / PDP-
LX6090H (with under speaker installed)
Attachment Procedure
1
Peel off one side of the double-stick tape on
the cushion and attach the cushion onto the
position in the bottom diagram.
����
����
• Be careful that the cushion does not catch on the pipe
insertion holes.
• Anchor it in place so that there are no gaps. If there is a gap,
the cushion may peel off.
2
After attaching the Pioneer television onto the
stand, attach the light-blocking pad onto the
position in the bottom diagram (PDP-LX6090 /
PDP-LX6090H only).
�����
13
En