Software Options; Communication - Siemens SIMATIC HMI Operating Instructions Manual

Overview

1.8 Software options

Device-specific functions
Object
Battery
WLAN quality
Effective range quality
Effective range name
Zone quality
Zone name
1.8 Software options
The following software options are available for the HMI device:
● WinCC flexible/Sm@rtService
● WinCC flexible/Sm@rtAccess
● WinCC flexible /Audit
1.9

Communication

Number of connections
Connection
Maximum number of connections
Note
In the following cases, you must not enable PROFINET IO in the Control Panel:
• Use of PLCs from other manufacturers
PLCs that can be used for the Mobile Panel 277F IWLAN
The HMI device has been enabled for use with the following type of PLC:
32
Specification
Displaying battery status
Displaying WLAN quality
Displaying the effective range quality
Display effective range name
Displaying zone quality
Displaying zone names
The Sm@rtService option enables you to access a remote HMI device from the HMI
device or PC via Ethernet. Access to the Mobile Panel 277F IWLAN is read-only.
The Sm@rtAccess option enables you to set up communication between different HMI
systems.
The /Audit option extends the HMI device to include functions for recording operations in
an audit trail and electronic signature.
Mobile Panel 277F IWLAN
Mobile Panel 277F IWLAN
6
Mobile Panel 277F IWLAN
Operating Instructions, 12/2007, A5E01003940-01
Yes
Yes
Yes
Yes
Yes
Yes