Displaying A Graphic - Siemens SINUMERIK 840D sl Operating Manual

Overview of the program data
2.7 File properties
2.7.4

Displaying a graphic

You have the option of displaying graphics on the user interface.
Procedure
See also
Showing properties (Page 22)
26
1. Position the cursor on the graphic file.
The system detects the graphic format and the softkey "Display graphic"
can be selected.
2. Press the softkey "Display graphic", to open the file and display it.
3. Press the softkey again to close the graphic.
Note:
You can only select and open one file at a time!
MCIS DNC - Direct Numerical Control
Operating Manual, 09/2011, 6FC5398-7DP20-1BA0